Dell PowerVault DP600 - Manual (Page 47)

47
complete the configurations and firewall openings.
Specify the fully qualified domain name (FQDN) for the DPM server. For the current
domain or for unique names across domains, specify only the computer name.
Note
You must run SetDpmServer.exe from :\Program Files\Microsoft
Data Protection Manager\bin. If you run the executable from any other location,
the operation will fail.
5. On the DPM server, from the DPM Management Shell prompt, type Attach-
ProductionServer.ps1
.
The password parameter is not required and we recommend that you do not provide it.
DPM will prompt you for a password, which will not appear on the screen. However, you
can provide the password if you want to use the script to install a protection agent on a
large number of computers.
Note
If you are attaching the production computer on a different domain, you must
specify the fully qualified domain name of the production computer.
Installing Protection Agents Manually
You can install protection agents manually. To manually install a protection agent, use the
command line options in the following procedure.
You can also install a protection agent independently using Microsoft Systems Management
Server (SMS). To create an SMS package for the DPM protection agent, you must provide the
following to the SMS administrator:
• A share to the DpmAgentInstaller.exe and DpmAgentInstaller_AMD64.exe packages.
• A list of servers on which you are installing the protection agents.
• The name of the DPM server.
To silently install the protection agent, from the command prompt, type DpmAgentInstaller.exe
/q .
To install a protection agent manually
1. On the computer on which you want to install the protection agent, from the command
prompt, type DpmAgentInstaller.exe .
You can perform a non-interactive installation by specifying a /q parameter after the
DpmAgentInstaller.exe command. For example, type DpmAgentInstaller.exe /q
server name>.