Dell PowerEdge R910 - Manual (Page 77)

Using the System Setup Program and UEFI Boot Manager 77
2 Press after you see the following message:
= UEFI Boot Manager
NOTE: The system will not respond until the USB keyboard is active.
If your operating system begins to load before you press , allow the
system to finish booting, and then restart your system and try again.
Using the UEFI Boot Manager Navigation Keys
UEFI Boot Manager Screen
Keys Action
Up arrow Moves to and highlights the previous field.
Down arrow Moves to and highlights the next field.
Spacebar, , <+>,
< – >
Cycles through the settings in a field.
Refreshes the UEFI Boot Manager screen, or
returns to the UEFI Boot Manager screen from the
other program screens.
Displays the UEFI Boot Manager help file.
Option Description
Continue The system attempts to boot to devices starting with
the first item in the boot order. If the boot attempt fails,
the system will continue with the next item in the boot
order until the boot is successful or no more boot
options are found.
<Boot options> Displays the list of available boot options (marked with
asterisks). Select the boot option you wish to use and
press Enter.
NOTE: If you hot-add a boot device, press to
refresh the list of boot options.
UEFI Boot Settings Enables you to add, delete, enable, or disable boot
options; change boot order; or execute a one-time boot
option.
book.book Page 77 Tuesday, December 4, 2012 3:11 PM