Dell PowerEdge R910 - Manual (Page 170)

170 Installing System Components
14 Install the memory risers in the same locations on the new board. See
"Installing a Memory Riser" on page 101.
15 If applicable, install the memory-riser blanks. See "Installing a Memory-
Riser Blank" on page 100.
16 Close the system. See "Closing the System" on page 90.
17 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
book.book Page 170 Tuesday, December 4, 2012 3:11 PM