Dell PowerEdge R910 - Manual (Page 146)

146 Installing System Components
Figure 3-27. Removing or Installing the RAID Battery
Installing the RAID Battery
CAUTION: Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1 Connect the battery cable to the integrated storage controller card.
2 Route the battery cable/SAS A cable along the chassis wall.
3 Connect the battery cable to the RAID battery.
1 battery carrier 2 RAID battery cable
3 RAID battery
1
3
2
book.book Page 146 Tuesday, December 4, 2012 3:11 PM