Dell PowerEdge R910 User Manual
Page 31
About Your System
31
E1631
System power
draw exceeded
threshold.
Contact
support.
The processors and memory
throttling is not sufficient to
keep system power
consumption below the
maximum safe level with
current power supply
configuration.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
E1632
PowerSafe
event.
Contact
support.
The processors and memory
have been throttled to keep
system power consumption
below the maximum safe
level with current power
supply configuration.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
E1710
I/O channel
check error.
Review &
clear SEL.
The system BIOS reported
an I/O channel check.
Check the SEL for more
information and then
clear the SEL. Remove
AC power to the system
for 10 seconds and restart
the system.
If the problem persists,
E1711
PCI parity
error on Bus
## Device ##
Function ##.
The system BIOS reported a
PCI parity error on a
component that resides in
PCI configuration space at
bus ##, device ##,
function ##.
Remove and reseat the
PCIe expansion cards. If
the problem persists, see
PCI parity
error on Slot
#. Review &
clear SEL.
The system BIOS reported a
PCI parity error on a
component that resides in
the specified slot.
Remove and reseat the
PCIe expansion cards. If
the problem persists, see
Code
Text
Causes
Corrective Actions
book.book Page 31 Tuesday, December 4, 2012 3:11 PM