Dell PowerEdge R910 User Manual
Page 47
About Your System
47
Memory Riser
disabled - SMI
channel training
failure.
The memory riser connector
is not properly seated.
The memory riser connector
or the processor socket may
be exposed to dust.
The processor has bent pins.
Reseat the memory riser(s).
on page 101.
Ensure that the memory riser
connectors and processor
sockets are clean.
Verify that there are no bent
pins on the processor. If the
processor has bent pins, see
Memory Riser
disabled - Memory
Buffer
communication
error.
Memory Riser
disabled -
MemBIST error.
The memory modules are not
properly seated.
The memory module
connector may be exposed to
dust.
Unsupported memory
module.
Replace or reseat the
memory module(s). See
on page 102.
Ensure that the memory
module connectors are clean
and supported memory
modules are installed in a
valid configuration. See
Memory Riser
disabled -
MemBIST timeout.
Memory Riser
disabled - Rank
not found.
Memory riser
disabled - DIMM
communication
error
Memory Riser
disabled - DDR
training failure
Memory Riser
disabled - Simple
memory test
failure.
Message
Causes
Corrective Actions
book.book Page 47 Tuesday, December 4, 2012 3:11 PM