Dell PowerEdge R910 - Manual (Page 38)

38 About Your System
E2021 Incorrect
memory
configur-
ation. Review
User Guide.
Incorrect memory
configuration.
Check screen for specific
error messages. See
"Troubleshooting System
Memory" on page 181.
E2022 General
failure
during POST.
Check screen
message.
General failure after video. Check screen for specific
error messages.
E2025 QPI
initializati
on error.
Contact
support.
QuickPath Interconnect
(QPI) failure.
See "Getting Help" on
page 203.
E2026 Memory
initializati
on error.
Contact
support.
Invalid memory
configuration.
Ensure that the memory
modules are installed in a
valid configuration. See
"General Memory Module
Installation Guidelines"
on page 92. See "Getting
Help" on page 203.
E2110 Multibit
Error on DIMM
##. Reseat
DIMM.
The memory module in slot
"##" has had a multi-bit
error (MBE).
See "Troubleshooting
System Memory" on
page 181.
E2111 SBE log
disabled on
DIMM ##.
Reseat DIMM.
The system BIOS has
disabled memory single-bit
error (SBE) logging and will
not log any more SBEs until
the system is rebooted. "##"
represents the memory
module implicated by the
BIOS.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Troubleshooting
System Memory" on
page 181.
Code Text Causes Corrective Actions
book.book Page 38 Tuesday, December 4, 2012 3:11 PM