Outback Power Systems MATE2 - Manual (Page 95)

ADV/MATE/GRIDUSE----------------
weekend 12:00A
gridusestart
DOWN ADV OFF ON
ADV/MATE/GRIDUSE----------------
weekend 12:00A
griduse stop
DOWN UP CHANGE
Weekend Grid-Use Start
This setting is the time during the weekend (Sat-
urday and Sunday) that a will be issued to
an FX system, allowing the FX to connect to the
AC input source. The time displayed is the default
setting. To change the time press the
soft key and adjust the time as you would for a
weekday setting.
This setting is the time during the weekend (Sat-
urday and Sunday) that a DROP will be issued
to the FX system, forcing the FXs to disconnect
from the AC input source. The time displayed is
the default setting. To change the time press the
soft key and adjust the time as you
would for a weekday setting.
After setting the START and STOP times, scroll
back to the first GRID-USE screen using the
soft key. Press the soft key to activate
GRID-USE Mode.
Weekend Grid-Use Stop