Outback Power Systems MATE2 - Manual (Page 85)

ADV/MATE/AGS/MR---------------
end of MUST RUN menu
UP TOP AGS
ADV/MATE/AGS/PG2-----------------
choose category
LOAD MUST
PG1 START RUN PG3
ADV/MATE/AGS/PG3----------------
choose category
%SOC
PG2 START TIMERS PG4
To proceed to the ADV/MATE/AGS/PG2 screen,
press the soft key
Press the soft key to access the ADV/MATE/
AGS/PG3 screen which includes the EXERCISE
option.
Press the <%SOC> soft key.
With a FLEXnet DC, a user can start a generator
based on a battery state of charge rather than its
voltage, which can be less accurately inteprepeted
depending on loads and surges. Use the
and soft keys to adjust this value. Press
the soft key to view the %SOC stop
screen.
A user can stop a generator based on the
percentage of the battery’s state of charge using
and soft keys.
Press the soft key to view the ADV/MATE/
AGS/PG3 screen.
ADV/MATE/AGS/%SOC--------------
%SOC start %
DOWN AGS INC DEC
ADV/MATE/AGS/%SOC--------------
%SOC stop 90%
DOWN AGS INC DEC
ADV/MATE/AGS/%SOC--------------
end of %SOC
START menu
UP TOP AGS