Outback Power Systems MATE2 - Manual (Page 25)

Backlight Adjustment
Choose from the SETUP/MATE/PAGE 1 Setup choices screen:
On the SETUP/MATE/GLOW screen, pressing
the soft key brings up three backlight
settings:
t
LEVEL
t
MODE
t
TIME
controls the backlight brightness and
is adjustable from 0% to 100% using and
soft keys.
allows user to set the backlight to al-
ways off, auto-off after a time, or always on by se-
lecting , , or , respectively.
sets the auto-off time limit from 1 to 60
minutes using and soft keys. This
is how long the MATE waits after the last button
press to turn off the backlight. Once the backlight
has turned off, any button press on the MATE will
turn it back on.
returns to the previous screen(s) and
back to the SETUP/MATE/PAGE 1 screen.
SETUP/MATE/PAGE1--------------
mate code rev: 402
Choose Category
CLOCK CNT GLOW PG2
SETUP/MATE/GLOW--------------
backlight controls
BACK LEVEL MODE TIME
MAIN------------------------------------
9:57:32A
SUM STATUS SETUP ADV
SETUP-------------------------------
choose device:
FX MATE
SETUP/MATE/PAGE1--------------
mate code rev: 402
choose category:
CLOCK CNT GLOW PG2
PATH