Outback Power Systems MATE2 - Manual (Page 37)

PATH
MAIN-----------------------------------
9:57:32A
SUM STATUS SETUP ADV
SETUP-------------------------------
choose device:
FX MATE
SETUP/MATE/PAGE1-----------------
mate code rev: 402
choose category:
CLOCK CNT GLOW PG2
SETUP/MATE/PAGE2-----------------
choose category:
PG1 SUMRY COMM MAIN
PATH
MAIN--------------------------------
9:57:32A
SUM STATUS SETUP ADV
Pressing the soft key in the MAIN menu
brings up your chosen SUMMARY screen or, if
None is chosen, it will bring up the FX SUMMA-
RY screen as a default. To adjust the timing of the
SUMMARY screen display, see the next section.
SETUP/MATE/SUMMARY----------
summary control
BACK TYPE DELAY ROLL
SETUP/MATE/SUMMARY/TYPE--
sum screen 19 minutes
delay time
BACK
INC DEC
In the SETUP/MATE/SUMMARY screen, press
the soft key; this will take you to
the sum screen delay time screen. Pressing the
<ROLL> soft key leads to the sum screen roll rate
screen.
The roll rate is how often the MATEswitches be-
tween the FX and CC summary screens. The rate
can be adjusted with the and soft
keys. Pressing the soft key returns to the
SETUP/MATESUMMARY screen.
SETUP/MATE/SUMMARY/TYPE--
sum screen 10 seconds
roll rate
BACK
INC DEC
in SUMMARY mode shows
how long it takes for a SUMMARY
screen to be automatically displayed.
This time can be increased or decreased
by pressing the and soft
keys. After the SUMMARY screen delay
time is chosen, press the soft
key to return you to the SETUP/MATE-
SUMMARY screen.