Outback Power Systems MATE2 - Manual (Page 94)

and set the hour to the desired
time. Press to access the adj min
screen.
and set the minutes to the desired
time. Press the soft key to return to the
weekday griduse start screen.
Press the soft key to access the ADV/
MATE/GRIDUSE weekday grid-use stop screen.
The WEEKDAY GRID-USE STOP setting is the
time during the week (Monday-Friday) that a
DROP will be issued to the FX system, forcing a
disconnect from the AC input source. The time
displayed is the default setting. To change the
time, press the soft key and adjust
the hour and minute settings on the next screens
using the and soft keys. Proceed
through the Adjust Hour (adj hour) and Adjust
Minutes (adj min) screens in the same manner
described in the weekday grid-use start section.
WEEKDAY GRIDUSE START
adj hour 12:00A
DOWN INC DEC
WEEKDAY GRIDUSE START
adj min 12:00A
INC DEC DONE
ADV/MATE/GRIDUSE-----------------
weekday 12:00A
griduse start time
DOWN UP CHANGE
ADV/MATE/GRIDUSE----------------
weekday 12:00A
griduse stop time
DOWN UP CHANGE
Weekday Grid-Use Stop