Dell Latitude XT (Late 2007) - Manual (Page 201)

Dell™ D/Bay 201
3 Insert the new device into the bay, push the device until you feel a click,
and push the device latch release in so that it is flush with the bay.
4 Connect the D/Bay cable to the powered USB connector on your
Tablet - PC or media base.
Removing and Installing Devices While the
Tablet-PC Is Running
1 Double-click the Safely Remove Hardware icon on the Windows
Notification area.
2 Click the device you want to eject.
NOTICE: To prevent damage to devices, place them in a safe, dry place when they
are not installed in the computer. Avoid pressing down on them or placing heavy
objects on top of them.
3 Press the device latch release so that the latch release pops out.
4 Pull the device by the latch release to remove the device from the D/Bay.
book.book Page 201 Tuesday, May 13, 2008 5:03 PM