Dell 966 All In One Photo Printer - Manual (Page 7)

1. Connect the DSL filter to an active telephone line.
2. Connect the printer directly to the output on the DSL filter.
NOTE: Do not install any splitters between the DSL filter and the printer. Contact your DSL service provider if
you need more help.
Connecting to an Answering Machine
1. Connect a phone cord from the FAX connector ( —upper connector) on the printer to an active telephone wall
jack.
2. Remove the blue protective plug from the PHONE jack connector ( —bottom connector).
3. Connect a phone cord from the answering machine to a telephone.
4. Connect a phone cord from the answering machine to the PHONE jack connector ( —bottom connector).
NOTE: If phone communication is serial in your country (such as Germany, Sweden, Denmark, Austria,
Belgium, Italy, France, and Switzerland), you must remove the blue plug from the PHONE jack connector (
—bottom connector), and insert the supplied yellow terminator for your fax to work correctly. You will not be
able to use this port for additional devices in these countries.
Connecting to a Computer Modem
1. Connect a phone cord from the FAX connector ( —upper connector) on the printer to an active telephone wall
jack.