Dell 966 All In One Photo Printer - Manual (Page 66)

Loading Banner Paper
1. Remove the paper tray.
2. Remove any paper from the tray.
3. Push the lever in, and then extend the tray until it is long enough to accommodate legal size paper.
50 sheets of glossy/photo or
matte paper The print side of the paper faces down.
The paper guides rest against the edges of the paper.
You select Automatic, Normal or Photo print quality.
10 mm stack of iron-on
transfers You follow the loading instructions on the iron-on transfer packaging.
The print side of the transfer faces down.
The paper guides rest against the edges of the transfer.
You select Automatic, Normal or Photo print quality.
50 sheets of transparencies
The rough side of the transparencies faces down.
The paper guides rest against the edges of the transparencies.
You select Automatic, Draft, Normal or Photo print quality.
25 sheets of labels
The print side of the labels faces down.
The top of the labels feeds into the printer first.
The paper guides rest against the edges of the paper.
150 sheets of letterhead paper
The print side of the letterhead faces down.
The top of the letterhead feeds into the printer first.
The paper guides rest against the edges of the paper.
150 sheets of custom size
paper The paper fits within these dimensions:
Width: 3.0 – 8.5 inches (76 – 216 mm)
Length: 5.0 – 17.0 inches (127 – 432 mm)
The print side of the paper faces down.
The paper guides rest against the edges of the paper.