beautypg.com

Dell 966 All In One Photo Printer User Manual

Page 22

background image

7

PictBridge

connector

The connector you use to connect your PictBridge-enabled digital camera or a USB key to

your printer.

8

Memory card

slots

Slots into which you insert a memory card containing digital pictures.

NOTE:

The LCD only displays JPG files found on the memory card. To view other image

types stored on the memory card, open the Memory Card Manager. For more information,

see

Using Memory Card Manager

.

9

Top cover with

integrated ADF

exit tray

Top of printer that holds your document or photo flat while you scan it. You can also pick

up your original document after it has gone through the ADF here.

10

ADF input tray

Tray that holds original documents. Use it to scan, copy, or fax multiple-page documents.

11 Express Service Code

Identify your printer when you use

support.dell.com

or contact technical support.

Enter the Express Service Code to direct your call when contacting technical support.

NOTE:

The Express Service Code is not available in all countries.

12 Supplies Reorder Label To order ink cartridges or paper, visit

www.dell.com/supplies

.

13 FAX connector (

— upper

connector)

Slot into which you plug an active telephone line to send and receive faxes.

NOTE:

Do not connect additional devices to the FAX connector ( — upper connector), and do

not connect a DSL (digital subscriber line) or ISDN (integrated services digital network) to the

printer without using a digital line filter.

14 PHONE jack

connector ( —
bottom

connector)

Slot on your printer into which you plug additional devices, such as a data/fax modem,

telephone, or answering machine. Remove the blue plug before use.

NOTE:

If the phone communication is serial in your country (such as Germany, Sweden,

Denmark, Austria, Belgium, Italy, France, and Switzerland), you must remove the blue plug from

the PHONE jack connector ( — bottom connector), and then insert the supplied yellow
terminator for faxing to work correctly. You will not be able to use this port for additional devices