Canon IMAGERUNNER 1670F - Manual (Page 50)

Specifying the Paper Type
The default paper type is . When making copies on paper other
than plain paper, you can specify the paper type according to the types available.
Specifying the correct paper type can prevent poor copy quality and may prevent
the copy image from being printed incorrectly.
To set ADDITIONAL FUNCTIONS, see “Accessing the Additional Functions Menu,”
on p. 4-2.
1
Press [Additional Functions].
2
Select
➞ .
3
Choose the paper type from the following:
• PLAIN PAPER (20 lb bond or 80 g/m 2 )
• TRACING PAPER (16 - 17 lb bond (56 - 63 g/m 2 )): Thin paper, tracing paper
• TRANSPARENCY: Transparencies
• SPECIAL PAPER 1 (21 - 32 lb bond (81 - 128 g/m 2 )): Thick paper*
• SPECIAL PAPER 2: Envelopes
* If the images are dirty even when making copies in the
setting, try the following:
Press [Additional Functions] select
➞
POWER LEVEL>
➞
Additional Functions
Selecting the Paper Feed Location 3-9
3
Using the Cop
y Functions
NOTE
**RG_Chap 03 3/4/04 7:43 PM Page 9