Canon IMAGERUNNER 1670F - Manual (Page 44)

4
Press [Start] to begin copying.
If the paper in the paper drawer or stack bypass runs out during copying, the
LCD displays . Load paper in the paper drawer or stack
bypass. When paper is loaded, the machine automatically resumes copying.
• If you load paper while making copies, do not load a different paper size.
• You can reserve the next copy job while the machine is outputting copies. (See
“Reserved Copying,” on p. 3-21.)
• After the machine finishes copying, the setting will remain. However, if you press
[Stop/Reset], or if no key is pressed for two minutes, the paper feeding location
will be reset to the paper drawer, and other settings will also be reset to the
default settings. You can specify the time until the machine enters the CLEAR> mode. (See “Timer Settings,” on p. 4-7.)
• The capacity of the output tray is 100 sheets (20 lb (80 g/m 2 )) of paper. To
prevent paper jams, remove paper from the output tray before the count
reaches 100.
SCANNING
COPY NO. 0001
5J=HJ
Copying Documents 3-3
3
Using the Cop
y Functions
NOTE
**RG_Chap 03 3/4/04 7:43 PM Page 3