Canon EOS 10D - Manual (Page 70)

70
Registering and Switching AF Point
Switching to the Registered AF Point
Normally, to switch to the registered AF point, you press the < > button and < > button
simultaneously. However, with C.Fn-13-1/2, you can just press the < > button to switch to
the registered AF point.
Press the < > button and < > button
simultaneously.
•
This is the default method with C.Fn-13-0.
(1)
(2) Press only the < > button to switch to
the registered AF point.
(
→p.150)
(3) Switch to the registered AF point only
while pressing the < > button.
(
→p.150)
•
When the < > button is released, it will return to
the original AF point.
For the setting procedure, see “Setting Custom Functions”
(
→p.145) or see page 69.
C.Fn-13-1
C.Fn-13-2
If C.Fn-13-1/2 and C.Fn-04-1/3 have been set, you can press only the < > button to
switch to the registered AF point and start autofocusing at the same time.