Canon EOS 10D - Manual (Page 168)

168
On-screen Messages
Set Date/Time The date/time has not been set. Captured images will not have the
correct image capture date/time.
Description Message
Turn off the camera
after sensor cleaning After cleaning the image sensor, turn the < > switch to < >.
Battery level is too
low. Cannot clean
sensor If there is insufficient battery power, the shutter may close during the
cleaning of the image sensor and the shutter curtains and image
sensor might be damaged. To prevent this, either use a fully-charged
battery or a household power outlet before starting to clean the image
sensor.
Folder number full Keep a new CF card on hand. Since the 999Canon folder has been
created, the current CF card will soon become full.
(When “IMG_9999” is created, “
” will be displayed.)
When the card photo printer for direct printing is connected to the camera, the camera’s LCD
monitor may display any of the messages below.
No paper The paper cassette has not been inserted properly or there is no
paper in the cassette. Or there is a problem with the paper feed
operation.
Description Message
No ink There is no ink cassette or the ink cassette has no ink.
Incompatible paper
size The wrong-size paper has been loaded in the printer. Printing is not
possible with paper of this size.
Incompatible ink size The wrong ink cassette has been loaded in the printer.
Ink cassette error Printing is not possible with this ink cassette.
Paper and ink do not
match The paper and ink do not match each other.
Paper jam The paper jammed during printing.
Paper has been
changed The paper size was changed prior to printing.
Recharge the printer
battery The printer’s battery is exhausted.
Communication error Communication error occurred.
Readjust trimming Printing was attempted with a style different from the trimming setting.