Canon EOS 10D - Manual (Page 146)

146
Custom Function Settings
C.Fn-01 SET button func. when shooting
You can assign a different function to the < > button.
In the case of C.Fn-01-1/2, you can press < >, then turn the
< > dial to set the desired setting directly while looking at the
LCD panel.
0: Default (no function)
1: Change quality
You can select the recording quality directly.
2: Change parameters
You can select the processing parameters directly.
“
” is for [Normal]. “ ”, “ ”, and “ ” are for [Set
1], [Set 2], and [Set 3] respectively. When “ ” is selected,
the color space will be [Adobe RGB].
3: Menu display
Provides the same function as the < > button.
4: Image replay
Provides the same function as the < > button.
C.Fn-02 Shutter release w/o CF card
0: Possible without CF card
1: Not possible
The shutter release will not work if there is no CF card in the
camera, so it prevents you from forgetting to load a CF card. If
there is no CF card and you press the shutter button, “
”
will blink on the LCD panel and in the viewfinder.
C.Fn-03 Flash sync speed in Av mode
0: Auto
1: 1/200sec. (fixed)
For flash shot in the aperture-priority AE mode (Av), the
shutter speed will be locked at 1/200 sec. This prevents a slow
shutter speed from being set in very dark conditions.
C.Fn-04 Shutter button/AE lock button
0: AF/AE lock
1: AE lock/AF
Convenient when you want AF and AE lock to operate
separately. Pressing the <
> button focuses the subject,
while pressing the shutter button halfway sets the AE lock.