Canon EOS 10D - Manual (Page 149)

149
Menu Settings
11
Custom Function Settings
2: –,0,+/Enable
Starts the bracketing with a decreased exposure (or bluer
white balance).
3: –,0,+/Disable
Starts the bracketing with a decreased exposure (or bluer
white balance), and the bracketing is repetitive.
AEB
0: Standard exposure
–: Decreased exposure
+: Increased exposure
White Balance Bracketing
0: Correct white balance
–: Bluish white balance
+: Reddish white balance
C.Fn-10 Superimposed display
0: On
1: Off
Disables the AF point from flashing in red when it achieves
focus. When the AF point is selected, it will still flash in red.
C.Fn-11 Menu button display position
Sets the menu item to be displayed when the < > button is
pressed.
0: Previous(top if powered off) menu
Displays the preceding menu item that was set.
However, if the <
> switch is set to < > or if the battery
pack or the CF card is replaced, the top menu item [Quality]
will be displayed.
1: Previous menu
Displays the preceding menu item that was set.
2: Top menu
Displays the top menu item [Quality].
C.Fn-12 Mirror lockup
0: Disable
1: Enable
Convenient for close-up and telephoto shots to prevent
camera vibration caused by the mirror’s action. The mirror
lockup procedure is explained on page 94.