Canon EOS 10D - Manual (Page 38)

38
Fully Automatic Shooting
You can easily and confidently capture any subject, with no need to do anything but press the
shutter button. The Canon EOS 10D can capture subjects at any of seven AF points, so that
anybody can take great shots easily.
Turn the Mode dial to < >.
•
The < > AF mode, < > (single) drive
mode, < > metering mode, “ ” ISO speed,
and < > white balance will be set automatically.
•
One of six image-recording quality settings (except
) can be selected. (
→p.46)
1
Focus the subject.
•
Look through the viewfinder and aim any AF point
over the subject. Then press the shutter button
halfway.
s The AF point that achieves focus will flash briefly. At
the same time, the beeper will sound and the focus
confirmation light <
●> in the viewfinder will light.
s The exposure settings will be displayed in the
viewfinder and on the LCD panel.
•
The number “ ” - “ ” displayed on the left of the
focus confirmation light < ●> indicates maximum
burst for continuous shooting.
•
If the CF card is almost full and has room for nine or
fewer shots, the remaining number of shots that can
fit on the card will be displayed by “
” to “ ”.
2
Shoot.
•
Compose the shot and check that the exposure
settings are not blinking. Then press the shutter
button fully to shoot.
s The captured image will be displayed for 2 sec. on
the LCD monitor.
3
AF point
Focus confirmation light
Maximum burst
Shutter speed Aperture