Canon EOS 10D User Manual
Page 148
148
Custom Function Settings
C.Fn-07
AF point registration
By registering a frequently-used AF point as the home position
(HP), you can instantly switch to this home position AF point
even while using another AF point. Automatic AF point selection
can also be registered as the home position.
0:
Center AF point
4:
Automatic selection
1:
Bottom
5:
Extreme left
2:
Right
6:
Left
3:
Extreme right
7:
Top
C.Fn-08
RAW+JPEG rec.
Sets the recording quality of the JPEG image recorded simulta-
neously and embedded in the RAW image file.
0: RAW+Small
1: RAW+Small
2: RAW+Medium
3: RAW+Medium
4: RAW+Large
5: RAW+Large
The dedicated software is required to extract the JPEG
image in the RAW image file.
C.Fn-09
Bracket. sequence/Auto cancel.
Sets the shooting sequence for AEB and white balance bracket-
ing (WB-BKT).
If [Auto cancel] is set, the bracketing will be canceled in the
following cases:
AEB: Canceled if the <
> switch is turned <
>, lens is
interchanged, flash is ready, battery is replaced, or the CF card
is replaced.
WB-BKT: Canceled if the <
> switch is turned <
>.
0: 0,–,+/Enable
1: 0,–,+/Disable
Starts the bracketing sequence with the correct exposure (or
white balance), and the bracketing is repetitive.