Canon EOS 10D - Manual (Page 24)

24
Installing and Removing the Battery
Installing the Battery
Load a fully charged BP-511 battery pack into the camera.
Open the battery compartment cover.
•
Slide the lever in the direction shown by the arrow
in the diagram, and open the cover.
1
Insert the battery into the camera.
•
Make sure the battery pack is facing the right way,
and insert it into the battery compartment.
•
Insert the battery pack until it locks into place.
2
Close the cover.
•
Press the cover closed until it clicks shut.
3
Battery Pack BP-512 can also be used.
Battery Level Icons
The level of charge remaining is shown in three stages when the < > switch is set to < >.
(
→p.30)
: Charge is sufficient.
: Charge is low.
: Battery pack must be recharged.