Canon EOS 10D - Manual (Page 173)

173
Ref
erence
13
Troubleshooting Guide
The CF card is not properly loaded.
s Load the CF card properly. (
→p.28)
The CF card is full.
s Use a new CF card or erase unnecessary images. (
→p.28, 117)
The battery is exhausted.
s Recharge the battery. (
→p.22)
You did not focus well. (The focus confirmation light in the viewfinder blinked.)
s Press the shutter button halfway and focus the subject. If you still
cannot focus properly, focus manually. (
→p.30, 71)
The LCD monitor screen is dirty.
s Use a soft cloth to clean the screen.
The LCD’s service life has expired.
s Contact your dealer or Canon Service Center.
The lens focus mode switch is set to < MF > or < M >.
s Set the lens focus mode switch to < AF >. (
→p.27)
Camera shake occured when you pressed the shutter button.
s To prevent camera shake, hold the camera still and press the shutter
button gently. (
→p.30, 36)
The data in the CF card is damaged.
s Format the CF card. (
→p.119)
s Use the correct CF card. (
→p.6, 175)
The image cannot
be erased. The image is protected.
s Cancel the protection first. (
→p.116)
The date and time
is wrong. The correct date and time has not been set.
s Set the correct date and time. (
→p.154)
No images can be
shot or recorded.
The LCD monitor
does not display a
clear image.
The image is out
of focus.
The CF card
cannot be used.
The date/time battery is exhausted.
s Replace the battery with a new one. (
→p.155)
The message
“
” appears
on the LCD panel
No image
appears on the
TV screen Video cable plugs are not inserted fully.
s Insert the video cable plugs firmly all the way. (
→p.115)
The correct video format (NTSC or PAL) has not been set.
s Set the camera to the correct video format to match the TV set.
(
→p.144)
Shooting
Image Review