Canon EOS 10D - Manual (Page 130)

130
Printing Options
•
Moving the trimming frame
• Turn the < > dial to move the trimming frame
horizontally or vertically.
• To move the trimming frame vertically, press the
<
> button to change the moving direction, then
turn the < > dial. Each time you press the < >
button, the direction changes.
• The moving direction is indicated by the < > or
< > arrows displayed outside the trimming
frame.
•
Rotating the trimming frame
• Press the < > button to rotate the trimming
frame. The button toggles between the vertical
and horizontal trimming orientation.
Exit the trimming screen.
•
Press < >.
s The trimming screen will quit and the direct printing
screen will appear.
•
On the upper left, you can check the printing area of
the image.
3
The shape of the trimming frame is determined by the [Image] and [Borders] settings.
•
When a BJ printer is connected to the camera, the color of the trimming frame will not
change regardless of the trimming frame size (magnification).
•
If you have set [Trimming] and then change the [Style] ([Image], [Borders]), the
[Readjust trimming] message will appear on the LCD monitor. Set [Trimming] again
or reset the [Style] settings.
•
The [Trimming] setting will be canceled if you do any of the following:
• Press the <
> button to quit the [Trimming] setting.
• Set [Trimming] for another image.
• Exit from direct printing.
(Turn the < > switch to < > or press the shutter button halfway.)
• Change the trimming frame to a size bigger than the maximum size.
•
When setting [Trimming], use the camera’s LCD monitor. If you use a TV monitor
connected to the camera with a video cable, the trimming frame may not display
correctly.
Trimming frame