Compex Technologies WPE54 - Manual (Page 94)

Chapter 5 Further Configuration
93
Set up Port Forwarding – For Known Server
Click on NAT from the CONFIGURATION menu.
Ensure whether the NAT Status
is enabled.
At the Advanced NAT Options
section:
Click on Port Forwarding.
The NAT Static Port Based
Entries table illustrated by the
screen shot displays the list of
current port-based entries.
Click on the
Add button.
For standard server applications:
HTTP/FTP/POP3/Netmeeting,
go to the Known Server
section:
Complete the Private IP
Address field.
Pick the appropriate selection from the Server Type drop down list.
Click on
Add button.
We illustrated with a POP3 server having Private IP Address of 192.168.168.45.