Compex Technologies WPE54 - Manual (Page 42)

Chapter 4 Common Configuration
41
4.3 Scan for Site Survey
(For Wireless Client Mode Only)
This feature only available in wireless client mode (Access Point Client, Wireless
Routing Client and Wireless Ethernet Adapter).
When one of the access points is connected to wired network and a set of wireless
stations, it is referred to as a Basic Service Set (BSS). The MAC address of the
access point is used as entry here.
SSID refers to the network name that uniquely identifies the network to which the
access point is connected.
Chan refers to the channel being used for transmission.
Auth refers to the types of authentication, such as WPA, WPA-PSK, etc being used by
the access point.
Alg refers to the types of algorithm, such as WEP, TKIP, etc being used by the access
point.
Signal describes the strength of the signal received in percentage.
Scan For Site Survey
In the Mode Setup page, click on the
Scan button.