Aiii.2, Configure dynamic ip address in windows xp/2000, Appendix iii tcp/ip configuration – Compex Technologies WPE54 User Manual

Page 128

Text mode
Original mode

Appendix III TCP/IP Configuration

127

AIII.2 Configure dynamic IP Address in Windows XP/2000

For Windows XP users, you do not need to add the TCP/IP protocol, as it is already
setup when a network card is installed. Therefore only the configuration for TCP/IP is
needed.

From the Windows 2000 Start menu, click Control Panel, followed by
Network and Internet Connections. Then click Network Connections.