Compex Technologies WPE54 - Manual (Page 47)

Chapter 4 Common Configuration
46
4.4.1.2 Wireless Pseudo VLAN Per Group
The access point can configure up to four ‘groups’ of wireless clients
identified by their MAC address. Whenever a wireless client requests network
access, the access point will first verify whether its MAC address is present in
any of the Pseudo VLAN groups. If it is, the access point will grant it access
to all the wired system resources and to all other wireless clients belonging to
the same Pseudo VLAN group only.
The following steps demonstrate how to set up Wireless Pseudo VLAN
Groups.
Wireless Pseudo VLAN – Per Group
From WLAN Setup under Configuration, click on Advanced, which shows the WLAN
Advanced Setup page.
Click on the
Access Control
button.
The Wireless Pseudo VLAN
function is Disabled by default.
Select Pseudo VLAN from the
drop-down list.
Click on the
Apply button.