Compex Technologies WPE54 - Manual (Page 89)

Chapter 5 Further Configuration
88
5.2.5 Australia BPA Cable
This type of connection has been especially customized for Big Pond Cable
Internet users in Australia
Changing WAN Type – Singapore ADSL Configuration
At the Australia BPA WAN
Setup page:
Key in the Username of your
Internet account.
Insert your account Password.
Enter the IP address of your
Authentication Server, as
defined by your ISP.
Fill in an Idling Timeout
value, in the range of 30-3600
seconds.
Entering 0 will disable this
feature.
The Status section gives you a summary of your connection settings such as:
- IP address
- Network Mask
- Gateway IP Address
- Primary & Secondary DNS
If you are online, pressing the
Disconnect button will immediately end your connection.
Click on the
Save button.
Press the
Reboot button to restart the system and allow the changes to take effect.