Compex Technologies WPE54 - Manual (Page 82)

Chapter 5 Further Configuration
81
Chapter 5 Further Configuration
This chapter provides guidelines in:
• Setting up uConfig (only in Gateway mode)
• Configuring WAN Setup (only in Gateway or Wireless Routing Client mode)
• Using NAT
• Routing
• Implementing IP Filtering
• Applying Remote Management
• Enabling Parallel Broadband
5.1 Setting up uConfig
(only in Gateway mode)
This option is ONLY available when the access point operates in Gateway mode.
uConfig Set up
Click on uConfig IP Setup from the CONFIGURATION menu.
Fill in the IP Address.
Key in the Network Mask.
Click on
Save button.
Reboot the system to make
your changes effective.