Compex Technologies WPE54 - Manual (Page 44)

Chapter 4 Common Configuration
43
4.3.1 Show Link Information
(For Wireless Client Mode Only)
This function offers a summary of the link data when the access point is in the
wireless client mode, i.e., either of the Access Point Client, Wireless Routing
Client or the Wireless Ethernet Adapter mode.
Show Link Information
In the Mode Setup page, go to the
Link Information section.
Click on the Show Link Information button. When an access point is connected to a wired
network and a set of wireless stations, it is referred to as a Basic Service Set (BSS).
The
Link Information table
illustrates the following data:
State refers to the MAC address of
the BSS.
Current Channel is the channel being presently used for transmission.
Signal Strength, given in percentage form, shows the intensity of the signal received and
hence the connection strength