Bio-Rad PROTEAN® IEF Cell Accessories User Manual

Page 28

7.2 Real Time Editing Programming Instructions

1. Press the

key to pause the method.

Press the adjacent soft key to edit the number of
IPG strips for this run only.

Select EDIT METHOD to edit steps in the
method.

Press the

key to resume the method.

2. The current step number and total number of

steps are displayed. Only the current and
subsequent steps can be edited.

Press the adjacent soft key to edit the voltage.

Press the adjacent soft key to edit the time or
volt-hours.

Edited values cannot be less than the elapsed
time or volt-hours for the paused step.

Press the EDIT NEXT STEP key to edit
additional steps. If the method consists of only
one step this option is not available. Adding
steps during real time editing is not allowed.

Press EDITING COMPLETE to exit the edit
mode and return to the pause screen.

3. Press the

to resume the run.

Edited values during real time editing are not
saved.

METHOD IS PAUSED

EDIT # OF GELS:

# >

EDIT METHOD

PRESS

TO CONTINUE

METHOD IS PAUSED

EDIT # OF GELS:

# >

EDIT METHOD

PRESS

TO CONTINUE

STEP #/#:

xxxxxV >

HRS:MIN

XX:XX >

(or) VHOURS XXXXX

EDIT NEXT STEP

EDITING COMPLETE