Bio-Rad PROTEAN® IEF Cell Accessories - Manual (Page 14)

3.2 Rehydration Programming Instructions
1. Select the Rehydration mode to program a
rehydration method separate from a focusing
program.
2. Select passive or active (50 V) rehydration.
Enter a rehydration temperature between
10–25 °C. The default value is 20 °C.
Press to begin the rehydration program.
Passive Rehydration Running Screen
One of these two rehydration running screens
will be displayed.
The maximum time the rehydration program
will run is 99:00 hours.
Press the key to return to the main screen.
Active Rehydration Running Screen
11
REHYDRATION >
PRESET METHOD >
STORED METHOD >
NEW METHOD >
REHYDRATION CONDITION
active @ 50 V PASSIVE >
ENTER TEMP: 20 °C >
PRESS TO START
REHYDRATION: PASSIVE
TEMP: 20/20 °C
TIME ELAPSED: 00:00
PRESS TO EXIT
REHYDRATION: AT 50 V
TEMP: 20/20 °C
TIME ELAPSED: 00:00
PRESS TO EXIT