Great Plains YP4025F-1670 Operator Manual - Manual (Page 134)

130 YP4010HD/YP4025/F Table of Contents Index Great Plains Manufacturing, Inc.
401-571M Table of Contents Index 2014-09-08
Ground Drive Fertilizer Pump
One pump kit integrates with the Type 2 fertilizer
manifold system. The pump mounts on a wing tool bar,
and requires a planter with a 35 cm (13.8 in.
) or greater single-row spacing, or a twin-row spacing.
Note: This pump is incompatible with 10 in., 8 in. and
7.5 in. row spacings. This option is not
recommended for the YP4025F.
This is the pump for use with the 400 gallon tank on the
PFC2000 tank cart or either SML cart. Point-row
operations are not supported. The pump operates
whenever the row units are lowered and in motion. For
operations, see the Seed Rate manual.
Type 2 Fertilizer Manifold
The Type 2 system includes all plumbing from the rows,
through the planter-mounted ground drive pump, and to
the on-board 2x200 gallon tanks.
The 407-243A kit extends the inlet to the rear hitch for
use with a cart, rather than with on-board tanks.
The wing boom systems are separate for each wing
The system does not include, and requires:
• a pump (order the 407-213A Ground Drive pump,
page 130).
• a tank system, such as the 407-244A on-board 2x200
gallon tanks (page 129), or the single 400 gallon tank
of the PFC2000 cart (page 129).
• a trailer hitch weldment, 401-467A (page 127), if a cart
is used.
Option Packages Part Number
Ground Drive Fertilizer Pump Kit 407-213A
Description Initial Order
Type 2 Fertilizer Manifold Kit 407-239A
Type 2 Boom Cart Hookup 407-243A
28416
29308