Great Plains V-300F Operator Manual - Manual (Page 54)

V-300, V-300F
148-057M 6/29/2006
52
Manually advance the bout number
Press to advance the current bout number by 1.
Hold the bout number
Press to 'hold' the current bout when the drill goes out of
work.
The display will flash 'StOP'.
Press again to resume the normal bout sequence.
Turn tramlining off
1. Press and hold the button while plugging the
instrument into a power source to enter program mode 2.
2. Press Select the channel.
3. PRESS to select 0 (Off) / 1 (On).
4. Unplug the instrument, then plug in again to resume the nor-
mal display mode.
1
2
3