ClearOne XAP TH2 - Manual (Page 9)

5 Introduction ~ Before You Install
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Power requirements
The XAP TH2 automatically accommodates voltage requirements of 100–240VAC,
50/60Hz, 15W.
Telephone line requirements
The XAP TH2 model operates on a standard analog telephone line and connects to
the telephone system with a standard RJ-11C modular jack. If you do not have an
RJ-11C jack where you want to install your XAP TH2, call your telephone company
for installation.
The XAP TH2 can be configured to meet compliance requirements of different
countries via the G-Ware software. See page 12.
Equipment placement
The XAP TH2 models are designed for installation in a standard 19-inch equipment
rack. You can also purchase side panels for desktop placement.
Network requirements
The expansion bus (RS-485) lets you connect up to eight XAP 800/400s and 16
XAP TH2 units, where the total number of microphone inputs does not exceed 64.
The maximum distance between interconnected XAP 800/400 or PSR1212 units is
80 feet (24 meters). Insertion of a XAP TH2 must not increase the cable length
between two PSR1212s, XAP 800s and/or XAP 400s beyond 80 feet. ClearOne
recommends that category five twisted-pair (10BaseT LAN) cable be used.
Environmental requirements
The XAP TH2 can be safely operated in a room with varying temperatures between
32 °F (0 °C) and 110 °F (43 °C).
Before You Install
Warning: The country
code must be set
correctly in
G-Ware to ensure that the unit
operates properly when
connected to the telco network
and complies with the country’s
telco requirements. Changing
this code to a country other than
the intended country of
operation might cause the XAP
!