ClearOne XAP TH2 - Manual (Page 52)

Warning: The country code settings must be set for the desired country of
operation in order to ensure proper operation of the XAP TH2 and to
ensure that the XAP TH2 complies with the country’s Telco requirements.
Changing these settings to a country other than the intended country of
operation might cause the XAP TH2 to be non-compliant.
FCC Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at
his/her own expense.
Changes or modifications not expressly approved by ClearOne Communications
could void the user’s authority to operate the equipment.
FCC Part 68 Compliance
FCC Registration Number: US:FBIBROOBXAPTH2 Ringer Equivalence
Number (REN): 0.0B(ac)
A label containing, among other information, the FCC registration number and
Ringer Equivalence Number (REN) for this equipment is prominently posted on the
top plate, near the rear of the equipment. If requested, this information must be
provided to your telephone company. USOC Jacks: This device uses RJ-11C and
RJ21X terminal jacks.
The REN is used to determine the quantity of devices, which may be
connected to the telephone line. Excessive RENs on the telephone line may result
in the devices not ringing in response to an incoming call. In most, but not all
areas, the sum of the RENs should not exceed five (5). To be certain of the number
of devices that may be connected to the line, as determined by the total RENs,
contact the telephone company to obtain the maximum RENs for the calling area.
Appendices ~ Appendix E: Compliance 48
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendix E: