ClearOne XAP TH2 - Manual (Page 7)

3 Introduction ~ Controls and Connections
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
ClearOne is not
responsible for product
damage incurred during
shipment. You must make claims
directly with the carrier. Inspect
your shipment carefully for
obvious signs of damage. If the
shipment appears to be damaged,
retain the original boxes and
packing material for inspection
by the carrier. Contact your
carrier immediately.
Unpacking
Ensure that the following items were received with your shipment:
!
Controls and Connections
Front panel
A. Transmit LED. This bicolor LED indicates the audio levels being transmitted
from the room to the telephone line.
B. Receive LED. This bicolor LED indicates the audio level the room is
receiving from the telephone line.
C. On LED. This bicolor LED indicates the hybrid’s ON state. The LED will
illuminate green when the hybrid is in the ON state.
D. On. The On button connects the XAP TH2 to the telephone line and
automatically adapts the hybrid to the line.
E. Off. The Off button disconnects the hybrid from the telephone line and mutes
all audio.
F. Off LED. This bicolor LED indicates the hybrid’s OFF state. The LED will
Figure 1.2. XAP TH2 front-panel controls
Figure 1.1. XAP TH2 shipment
Pressing and holding the
On button for more than
a half-second while the
hybrid is active will readapt it.
When the hybrid is activated
from the Off to On state, the XAP
TH2 will send the updated status
via the expansion bus.
✍ ✍