ClearOne XAP TH2 - Manual (Page 17)

13 Configuration ~ Telco Configuration
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
XAP TH2 Flow Screen
The XAP TH2 Flow Screen shows a detailed block diagram of the audio path in
relation to the TH2. There are four buttons on the Flow Screen: Dial, Telco Config,
Telco Meters, and GPIO builder. The Flow Screen is displayed for the selected unit in
the site panel on the left of the G-Ware screen.
To configure the XAP TH2
1. Click the Telco Config button on the XAP TH2 Flow Screen.
2. The Telco Config window opens. Refer to the table on the following
page for a description of configurable settings.
3. Click Close when you have finished making changes to save the settings and
close the window.
Figure 3.5. Telco Configuration window for XAP TH2
Telco Configuration