ClearOne XAP TH2 - Manual (Page 39)

35 Appendices ~ Appendix C: Serial Commands
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
DTMFLVL - DTMF Tone Level
This command selects/reports the DTMF tone’s level.
Command form: DEVICE DTMFLVL [Value]
Argument details
Name Description Units
Channel See Groups and Channels, page 29
Value -12.00 – 12.00 dB
(Null to query in text)
Example: #62 DTMFLVL 1 6 On XAP TH2 unit 2 (#62), the DTMF tone level
(DTMFLVL) is set to 6dB.
DTONELVL - Dial Tone Level
This command selects/reports the audible dial tone’s level.
Command form: DEVICE DTONELVL [Value]
Argument details
Name Description Units
Channel See Groups and Channels, page 29
Value -12.00 – 12.00 dB
(Null to query in text)
Example: #60 DTONELVL 1 3 On XAP TH2 unit 0 (#60), the dial tone level
(DTONELVL) is set to -3dB (3).
FLOW - Flow Control
This command selects/reports the flow control of the serial port on the unit.
Hardware flow control is implemented using DTR and DSR.
Command form: DEVICE FLOW [Value]
Argument details
Name Description
Value 0 = Off, 1 = On, 2 = Toggle
(Null to query in text)
Example: #63 FLOW 1 On XAP TH2 unit 3 (#63), the flow control (FLOW) to
the RS-232 port is enabled (1).