ClearOne XAP TH2 - Manual (Page 20)

Configuration ~ Synchronizing Site Files 16
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
If you have created your site file offline, or have made changes to your site file, you
will need to connect to your site and sync the units to the site file.
To sync site file to the XAP TH2
1. Connect to your site or unit using one of the following methods:
~ Establish a direct serial connection from the RS-232 port on the
XAP TH2 to the COM port on your PC
~ Establish a direct serial connection from you PC to the XAP 800
which is linked to the XAP TH2(s) via the E-bus
2. Click the Connect button on the G-Ware toolbar or select Connect from
the Connect menu. Choose to sync to Document. This will update your units
with the configurations you have made in the site file.
Figure 3.7. Connection choices
If you sync to the
Unit(s), you will update
y
o u r
G-Ware site file with the state of
the unit. If you sync to the
Document, you will update your
units with the configurations you
have saved in the site file.
Synchronizing Site
✍ ✍