LaMotte SMART Spectro Spectrophotometer - Manual (Page 41)

n
SELECTING THE NUMERICAL FORMAT OF THE RESULT
To input tests with very different ranges, the number of decimal places displayed
for a result can be selected. A test which ranges from 20 to 1000 ppm should not
be displayed with three decimal places. A test with a range from 0.010 to 0.500
needs three decimal places (the microprocessor will always calculate the
concentration to many more significant figures than will be displayed). Menu
choices of 0, 1, 2, or 3 decimal places will be given for the display.
Scroll to FORMAT RESULTS and press
ENTER/Q button to select FORMAT RESULTS
while in the 101 H2O menu.
101 H2O
SELECT WAVELENGTH
NEW CALIBRATION
* FORMAT RESULT
END OF LIST
Scroll to the number of decimal places to be
shown. Press
ENTER/Q button to select that
number format.
DECIMAL PLACES?
* 0 PLACES
1 PLACES
2 PLACES
3 PLACES
END OF LIST
The 101 H2O menu will appear.
Since no more editing needs to be done press
EXIT button to escape to EDIT USER TESTS
menu.
101 H2O
NAME THE TEST
SELECT WAVELENGTH
NEW CALIBRATION
Continued on next page ...
SMART SPECTRO SPECTROPHOTOMETER 05.04 41