LaMotte SMART Spectro Spectrophotometer - Manual (Page 36)

n
NAMING THE TEST
A NAME can be up to 14 characters long. The menu choices for each character
are 26 letters A to Z, ten numerals 0 to 9, a space, a dash, a decimal point, and a
!
as a terminator. Selecting the terminator indicates the end of the name and
stores the name. The terminator, !, is the first menu choice since it is the one
character that will always have to be selected. It is before the letter A. DO NOT
CHOOSE THE ! UNTIL THE NAMING OF THE TEST HAS BEEN
COMPLETED. The terminator should be selected following the end of the
name. It must be the last character selected.
From 101 UserTest 1 menu press the
ENTER/Q button to select NAME THE TEST
and change the name of User Test 1
.
101 User Test 1
* NAME THE TEST
SELECT WAVELENGTH
NEW CALIBRATION
FORMAT RESULT
END OF LIST
Scroll to CHANGE and press
ENTER/Q to select
CHANGE
. In this example the new test name will
be H2O. The characters of the name will be
selected one at a time, from left to right.
NAME THE TEST
KEEP
* CHANGE
END OF LIST
NOTE: Select KEEP to go back to 101 User Test 1 menu.
Select CHANGE to change the name of test 101.
Press the
t button to scroll right to the letter H.
Selection of characters is controlled by moving
the blinking cursor over top of the letter to be
chosen. The
s button scrolls left. The t button
scrolls right. Press
ENTER/Q with the blinking
cursor over the letter H to select it. The letter H
will appear now in line next to 101. Continue in
this fashion until entire H2O is entered. Press
EXIT to delete/erase any incorrect entry and start
over. Select
! at the end of the name to save the
name. The display will return to the KEEP
CHANGE
menu. Select KEEP to save the name
and return to 101 H2O menu. Note that test
101
is named H2O.
NAME THE TEST
101
!ABCDEFGHIJKLMNOPQR
STUVWXYZ
NAME THE TEST
* KEEP
CHANGE
END OF LIST
Continued on next page...
36 SMART SPECTRO SPECTROPHOTOMETER 05.04