LaMotte SMART Spectro Spectrophotometer - Manual (Page 126)

COPPER–UDV
BICINCHONINIC ACID METHOD–UNIT DOSE VIALS
CODE 4314-H
QUANTITY CONTENTS CODE
1 Copper Unit Dose Vials, 10 pouches 4314-H
Equipment needed but not suppled:
STANDARD ACCESSORY PACKAGE • CODE 1961
1 Package of 3 Vials (empty) 0156
1 Syringe, 3 mL, plastic 1184
1 Foil Storage Bag 9467
Or:
ADVANCED ACCESSORY PACKAGE • CODE 1962
1 Pipettor 30528
1 Pipet Tip (0-5 mL) 30695
1 Cuvette Rack 31695
1 Package of 3 Vials (empty) 0156
1 Foil Storage Bag 9467
*WARNING: Reagents marked with a * are considered to be potential health hazards. To view
or print a Material Safety Data Sheet (MSDS) for these reagents see MSDS CD or
www.lamotte.com. To obtain a printed copy, contact LaMotte by e-mail, phone or fax.
The copper content of drinking water generally falls below 0.03 parts per
million, but copper levels as high as 1.0 part per million will give water a bitter
taste. Waters testing as high as 1.0 part per million copper have probably been
treated with a copper compound, like those used in the control of algae, or
have become contaminated from untreated industrial wastes. The addition of
copper sulfate to lakes causes an increase in the copper content of the
sediments. Acid waters and those high in free carbon dioxide may cause the
corrosion or “eating away” of copper, brass and bronze pipes and fittings. This
corrosion results in the addition of copper to the water supply.
APPLICATION: Drinking, surface, and saline waters; domestic and industrial
wastes.
RANGE: 0.00–4.00 Copper
METHOD: Cupric ions form a purple complex with bicinchoninic acid
around pH 6–7, in proportion to the concentration of copper
in the sample.
SMART SPECTRO TEST PROCEDURES 05.04 Copper–UDV 1/3