Tweco 175i Transtig - Manual (Page 18)

TRANSMIG 175i
INTRODUCTION 2-6 Manual 0-5143
Note 4: CIGWELD reserves the right to change product performance and specifications without
notice
Note 5: Transmig 175i Plant Part No. W1005175M (Asia Version) and Transmig 175i Power
Source Part No. W1005176M (Asia Version) are not fitted with a VRD. Additional safety precau-
tions may be required when using unit in an environment with increased hazard of electric shock
. Please refer to relevant local standards for further information prior to using in such areas.
Note 6:
Due to variations that can occur in manufactured products, claimed performance, volt-
ages, ratings, all capacities, measurements, dimensions and weights quoted are approximate only.
Achievable capacities and ratings in use and operation will depend upon correct installation, use,
applications, maintenance and service.
2.11 Options and Accessories
Part Number Description
W4013701 Tweco professional Fusion 250A MIG Torch, 3.0 metre EURO
OTWX212/3035 TWECO #2, 250A MIG torch, 3.6 metre EURO
W4013801 TIG Torch 17V with 4m lead
W4013800 TIG Torch 17V with 4m lead and remote control
7977036 Feed Roll 0.6/0.8mm V groove (hard), (fitted)
7977660 Feed Roll 0.9/1.2mm V groove (hard)
7977731 Feed Roll 0.8/0.9mm U groove (soft)
7977264 Feed Roll 1.0/1.2mm U groove (soft)
7977732 Feed Roll 0.8/0.9mm V groove knurled (flux cored)
704277 Feed Roll 1.2/1.6mm V groove knurled (flux cored)
W7004913 Shielding Gas Hose Assembly
WSPLIER MIG Pliers
Table 2-2: Transmig 175i Optional Accessories