Sindoh M611 - Manual (Page 55)

1-
27
Preparation for Using the Machine
1
Placing Document on Exposure Glass
1 Lift ADF
Always lift ADF more than 20° .
If you lift it less than 20°, the size of the original may not be detected.
2 Place the original faced down on Exposure Glass with the original laid to a grid at the upper left
corner on the glass of scanner.
3 Lower ADF
Note
- In case the original remains on ADF, the original on Exposure Glass is not scanned.
- When you copy a book, do not press it toward the glass too hard.
- Any sharp jut may leave dents or scratches on the exposure glass.
ADF