Sindoh M611 - Manual (Page 173)

4-
35
Settings and Changes of Each Function
4
Auto Redial
Number of Auto Redial
As many number as set here, the machine can retry to send the fax if it is not sent properly because the re-
ceiver’s fax is busy or has any problems.
1 Go to [Menu] [Settings] [Fax Settings] [Tx Settings] [Auto. Redial] [No. of Retry].
2 Press【◀】or 【▶】button to select the number of redial.
- For the number of redial, 0-5 are available and the default value is 2.
3 Press【OK】to save the number or redial.
Interval of Auto Redial
You can specify the interval time for Auto Redial.
1 Go to [Menu] [Settings] [Fax Settings] [Tx Settings] [Auto. Redial] [Retry interval].
2 Press【◀】or【▶】 to select the interval of redial.
- For the interval of redial, 1-5 (minutes) are available and the default value is 2.
3 Press【OK】to save the interval of redial.
Confidential Tx (Transmission)
If this function is on, the reception is allowed only with confidential reception password set on the receiver`s
side
1 Go to [Menu] [Settings] [Fax Settings] [Tx Settings] [Confidential Tx].
2 Press 【▲】 or 【▼】 to set the confidential Tx
3 Press【OK】to save the setting.
- When it is [ON], enter the password.
Use the number pad to enter a 4-digit password, and then press【OK】